American Made Takane Clock Movements
Dimensions: 2 1/8 in w x 2 1/8 in h x 5/8 in d
These Takane mini-quartz movements are the standard in the industry. Perfect for clock hands under 5” long. It runs on one "AA" battery and is accurate to within two minutes a year. To choose the proper shaft length, carefully measure the thickness of the material the movement shaft will go through and find the appropriate model in the table below. If you are using a glass or plastic cover over the movement, make sure you have at least 1/8 inch extra clearance as you will need room for a second hand or a minute hand cap nut.
FREE CHOICE of clock pairs of hour and minute hands is included.
See the clock hands on the clock hands page. Please do not assume that any clock hands you have will fit, as the mounting holes are not standardized. Mounting hole sizes and shapes are shown at the top of the clock hands link.
These American made Takane movements will operate a second hand, but second hands are considered optional.
All models have a 5/16" shaft diameter so a 3/8" mounting hole is the correct size to drill in your case.
- American "I" Shaft - Diameter 5/16"
- Optional --- Front Loading Metal Hanger
- Step Second Hand Motion
- Runs On 1 "AA" Size Battery